Support

Roam Luggage Strap setup and help

Setup, charging, the TSA lock and help for your Roam Luggage Strap. Everything is on this page.

KLIP Roam Strap

Set up in 1 minute

1
Charge it

Charge it fully with the USB-C cable before first use.

2
Check your iPhone

Bluetooth, Wi-Fi or mobile data, Location Services and Find My iPhone all need to be on.

3
Turn it on

Short press the power button once. You'll hear a beep.

4
Connect

Open the Find My app and tap Items, then Add Item, then Other Supported Item. When it appears, tap Connect. Don't leave the Find My app while it pairs.

5
Finish

Give it a name (for example Suitcase) and register it to your Apple ID.

Fit it and use the TSA lock

Fit it to your luggage

Wrap the strap around your suitcase, pull it tight and close the buckle. It adjusts to fit most suitcases and travel bags.

TSA lock

Airport security can open the TSA lock without damaging it.

Change the lock code

The default code is 000.

  1. Set the dials to the current code.
  2. Press and hold the button on the bottom.
  3. While holding it, turn the dials to your new code.
  4. Release the button. Your new code is saved.

Using it

Directions

Find My, Items, select it, Directions. Shows where it is on the map.

Play Sound

Find My, Items, select it, Play Sound. Works within Bluetooth range (about 50 m) and needs an internet connection.

Notify When Left Behind

Find My, Items, select it, turn on Notify When Left Behind. Your iPhone tells you when you leave it behind.

Lost Mode

Find My, Items, select it, Lost Mode, Enable. Add a phone number or email so a finder can contact you.

Power, reset and charging

Power on

Short press the button once. You'll hear a beep.

Power off

Press the button 3 times: 2 short presses, then 1 long press. You'll hear two beeps when it's off.

Factory reset

Press the button 5 times: 4 short presses, then 1 long press. You'll hear one beep when it's reset.

Remove it from Find My first, or it stays linked to your Apple ID.

Auto power off

If it isn't paired within 10 minutes of turning on, it switches off by itself. Turn it on again to pair.

Charging
  • Charge it with the USB-C cable
  • The light is orange while charging and green when it's full
  • A full charge takes about 1.5 hours
  • You can check the battery level in the Find My app
Battery life

Up to 5 months per charge. We recommend charging about every 4 months.

Troubleshooting

Before you start

  • iPhone 8 or later on iOS 14.5 or later
  • Bluetooth, Location Services and Find My iPhone are on
  • Wi-Fi or mobile data is on
  • You're signed in to iCloud, with two-factor authentication on your Apple ID
  • Keep the product within 10 to 20 cm of your iPhone and don't leave the Find My app during setup

It doesn't appear in Find My

Try these in order:

  1. Make sure it's on (listen for the beep).
  2. Turn Bluetooth off and on.
  3. Turn Airplane Mode on for 10 seconds, then off.
  4. Restart your iPhone.
  5. Factory reset the strap and try again.
  6. Charge it for 20 to 30 minutes and try again.

"This item is linked to another Apple ID"

It's still paired to a previous owner. They need to remove it in Find My (Items, select it, Remove Item). Then factory reset the product and pair it again.

Pairing fails or times out

  • Keep the product very close to your iPhone
  • Start pairing straight after turning it on
  • Or factory reset it and try again

Play Sound doesn't work

  • Move closer (Bluetooth range is about 50 m)
  • Check your iPhone is connected to the internet
  • Try again in Find My

Notify When Left Behind isn't working

  1. Check Find My can use your location: Settings, Privacy & Security, Location Services, Find My.
  2. Check notifications are on: Settings, Notifications, Find My, Allow Notifications.

Charging problems

  • Check the USB-C cable is pushed in fully
  • Try a different cable or power adaptor
  • Leave it charging for 30 minutes and try again

Safety and care

Temperature

Use it between -10°C and 35°C.

Keep it dry

Don't expose it to water, rain or fire. Don't use it if it's damaged.

Don't open it

Don't take it apart or modify it. This can void the warranty.

Passing it on

Remove it from your Apple ID in Find My first, then factory reset it so the next owner can pair it.

Compatibility

  • Works with Apple Find My
  • You need an Apple ID with two-factor authentication and an iPhone 8 or later on iOS 14.5 or later
  • Each product connects to one Apple ID
  • One Apple ID can have up to 32 Find My items, including KLIP products, AirTags and other Find My accessories (iPhone, iPad, Mac, Apple Watch and AirPods don't count)
  • Android: coming soon
Still need help?Email support@klipofficial.com with your iPhone model and iOS version, what's happening, and whether it powers on, beeps or shows a charging light.
Contact us